| 1 |
Limit State Method 3 (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 2 |
Design of Singly reinforced section by Limit State of Collapse (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 3 |
Analysis of singly reinforced beam by Limit State of Collapse (Design of Concrete Structures1, B.Tech 3 year) |
View |
| 4 |
Design of Singly reinforced section by Limit State Method of Collapse (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 5 |
Design of Singly reinforced section by Limit State of Collapse 3 (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 6 |
Continuity Equation (Fluid Mechanics, B.Tech 2 year) |
View |
| 7 |
continuity equation for polar quardinates (Fluid Mechanics, B.Tech 2 year) |
View |
| 8 |
Types of fluid flow (Fluid Mechanics, B.Tech 2 year) |
View |
| 9 |
velocity and acceleration (Fluid Mechanics, B.Tech 2year) |
View |
| 10 |
Experimental method of meta centric height determination and numericals(Fluid Mechanics, B.Te h 2 year) |
View |
| 11 |
Analytical method of determination of Meta centric height (Fluid Mechanics, B.Tech 2 year) |
View |
| 12 |
Conditions of Equilibrium (Fluid Mechanics, B.Tech 2 year) |
View |
| 13 |
Metacentre (Fluid Mechanics, B.Tech 2 year) |
View |
| 14 |
Analysis of Doubly Reinforced section by WSM 1( Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 15 |
Design of Singly reinforced section by working Stress Method ( Design of Concrete Structures 1, B.Tech 3 Year) |
View |
| 16 |
Calculation of Stresses in Doubly Reinforced section by WSM (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 17 |
Design of Doubly Reinforced section by WSM (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 18 |
Analysis of Doubly Reinforced section by WSM 2(Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 19 |
Determination of MOR in Doubly Reinforced section by WSM (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 20 |
Determination of stresses in singly reinforced section by working Stress Method (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 21 |
Limit State Method 1 (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 22 |
Limit State Method 2 (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 23 |
Traversing (Surveying, B tech, 2nd year) |
View |
| 24 |
Transit Method of Traversing ( Surveying, Btech, 2nd year) |
View |
| 25 |
Theodolite ( Surveying, Btech, 2nd year) |
View |
| 26 |
Slip Critical Connection ( Design of Steel Structures, B tech, 4th year) |
View |
| 27 |
Simple Welded Connection ( Design of Steel Structures, Btech, 4th year) |
View |
| 28 |
Pyring Force, Pinned and Riveted Connections ( Design of Steel Structures, B tech, 4th year) |
View |
| 29 |
Permeability (Geotechnical engineering, B.Tech, 3rd Year) |
View |
| 30 |
Numerical on Permeability ( Geotechnical engineering, Btech, 3rd year) |
View |
| 31 |
Numerical on Double Cover Butt Joint( Design of Steel Structures, B tech, 4th year) (1) |
View |
| 32 |
Laboratory Method For Permeability Determination (Geotechnical engineering, B.tech , 3rd year) (1) |
View |
| 33 |
Important definition and temporary adjustments in Theodolite ( Surveying, Btech, 2nd year) |
View |
| 34 |
Factors Affecting Permeability ( Geotechnical engineering, B.tech, 3rd year) |
View |
| 35 |
Closing error in Traverse ( Surveying, Btech, 2nd year) |
View |
| 36 |
Traffic Studies 3 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 37 |
Traffic Studies 2 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 38 |
Traffic Studies 1 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 39 |
Traffic Signals (Transportation Engineering, B.Tech, 3rd year) |
View |
| 40 |
Traffic Control Devices (Transportation Engineering, B.Tech, 3rd year) |
View |
| 41 |
Traffic Characteristics (Transportation Engineering, B.Tech, 3rd year) |
View |
| 42 |
Signal Design 1 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 43 |
Plastics (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 44 |
Initial Losses & Infiltration (Engineering Hydrology, B.Tech, 4th year) |
View |
| 45 |
Geometric Design 13 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 46 |
Geometric Design 12 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 47 |
Evaporation Estimation & Measurement (Engineering Hydrology, B.Tech, 4th year) |
View |
| 48 |
Evaporation & affecting factors (Engineering Hydrology, B.Tech, 4th year) |
View |
| 49 |
Design of Rotary-Numericals (Transportation Engineering, B.Tech, 3rd year) |
View |
| 50 |
Design of Rotary (Transportation Engineering, B.Tech, 3rd year) |
View |
| 51 |
Working Stress Method Assumptions (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 52 |
Two hinged arches (Structural Analysis 2, B.Tech 3 year) |
View |
| 53 |
Singly WSM numerical 2(Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 54 |
Singly WSM numerical 1 (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 55 |
Properties of Concrete (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 56 |
Design Philosophies(Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 57 |
Curved Surface Submerged in liquid(Fluid Mechanics, B.Tech 2 year) |
View |
| 58 |
Concrete mix proportioning, Types of loads(Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 59 |
Buoyancy and Floatation (Fluid Mechanics, B.Tech 2 year) |
View |
| 60 |
Balanced, Under reinforced and over reinforced section (Design of concrete structures 1, B.Tech 3 year) |
View |
| 61 |
Analysis of singly reinforced beam (Design of Concrete Structures1, B.Tech 3 year) |
View |
| 62 |
Analysis of Singly reinforced beam (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 63 |
Timber 4 (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 64 |
Timber 3 (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 65 |
Timber 2 (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 66 |
Timber 1 (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 67 |
Testing of Concrete (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 68 |
Lime (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 69 |
Bricks 4 (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 70 |
Bricks 3 (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 71 |
Bricks 2 (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 72 |
Bricks 1 (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 73 |
Geometric Design 7 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 74 |
Geometric Design 6 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 75 |
Geometric Design 5 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 76 |
Geometric Design 3 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 77 |
Geometric Design 2 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 78 |
Geometric Design 1 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 79 |
Engg. Hydrology-Introduction 2 (Engineering Hydrology, B.Tech, 4th year) |
View |
| 80 |
Engg. Hydrology-Introduction 1 (Engineering Hydrology, B.Tech, 4th year) |
View |
| 81 |
Well Sinking And its process (Advance Foundation Design, B.Tech, 3rd year) |
View |
| 82 |
Well Foundation and its elements (Advance Foundation Design, B.Tech, 3rd year) |
View |
| 83 |
Vibration Of Machine Foundation (Advance Foundation Design, B.Tech, 3rd year) |
View |
| 84 |
Under-reamed Pile (Advance Foundation Design, B.Tech, 3rd year) |
View |
| 85 |
Ultimate Load Capacity of pile group and settlement (Advance Foundation Design, B.Tech, 3rd year |
View |
| 86 |
Ultimate Bearing Capacity of Pile (Advance Foundation Design, B.Tech, 3rd year |
View |
| 87 |
Type Of Slope Failure (Advance Foundation Design, B.Tech, 3rd year |
View |
| 88 |
Schmmertman & De-beer Method (Advance Foundation Design, B.Tech, 3rd year) |
View |
| 89 |
Pile Foundation And Classification (Advance Foundation Design, B.Tech, 3rd year |
View |
| 90 |
Method Of Slices and Taylor's Stability (Advance Foundation Design, B.Tech, 3rd year |
View |
| 91 |
Machine Foundation and its type (Advance Foundation Design, B.Tech, 3rd year |
View |
| 92 |
Machine Foundation and its type (Advance Foundation Design, B.Tech, 3rd year |
View |
| 93 |
Introduction To Slope Stability (Advance Foundation Design, B.Tech, 3rd year |
View |
| 94 |
Foundation On Expansive Soil (Advance Foundation Design, B.Tech, 3rd year) |
View |
| 95 |
Field Method For Pile Test and Negative Skin Friction (Advance Foundation Design, B.Tech, 3rd year) |
View |
| 96 |
Construction On Expansive soil (Advance Foundation Design, B.Tech, 3rd year |
View |
| 97 |
Classification Of Expansive Soil (Advance Foundation Design, B.Tech, 3rd year) |
View |
| 98 |
Basic Definition Of Machine Foundation (Advance Foundation Design, B.Tech, 3rd year) |
View |
| 99 |
Water Transport Part-2 ( Transportation Engineering-2, B.Tech, 3rd year) |
View |
| 100 |
Water Transport Part-1 (Transportation Engineering-2, B.tech, 3rd Year) |
View |
| 101 |
Runway Length Design, Taxiway, Airport Layout (Transportation Engineering-2, B.Tech, 3rd Year) |
View |
| 102 |
Runway Length Design ( Transportation Engineering-2, B.Tech, 3rd Year) |
View |
| 103 |
Points And Crossing- Points (Transportation Engineering-2, B.Tech, 3rd Year) |
View |
| 104 |
Points And Crossing- Crossing ( Transportation Engineering-2, B.Tech, 3rd Year) |
View |
| 105 |
Design Of Turnout( Transportation Engineering-2, B.Tech, 3rd Year) |
View |
| 106 |
Unit Weight of Soil_compressed (Geotechnical Engg., B.Tech, 3rd year) |
View |
| 107 |
Soil structure and clay mineralogy (Geotechnical Engg., B.Tech, 3rd year) |
View |
| 108 |
Soil classification (Geotechnical Engg., B.Tech, 3rd year) |
View |
| 109 |
Shrinkage Limit (Geotechnical Engg., B.Tech, 3rd year) |
View |
| 110 |
Sensitivity, Thixotrophy and Collapsibility (Geotechnical Engg., B.Tech, 3rd year) |
View |
| 111 |
Numericals on index properties (Geotechnical Engg., B.Tech, 3rd year) |
View |
| 112 |
Liquid limit and plastic limit (Geotechnical Engg., B.Tech, 3rd year) |
View |
| 113 |
Indian standard classification system (Geotechnical Engg., B.Tech, 3rd year) |
View |
| 114 |
Important Derivations (Geotechnical Engg., B.Tech, 3rd year) |
View |
| 115 |
Consistency Index and other index properties (Geotechnical Engg., B.Tech, 3rd year) |
View |
| 116 |
Types and failure of bolted joints (Design of Steel Structures, B.Tech, 4th year) |
View |
| 117 |
Specification of bolted joint (Design of Steel Structures, B.Tech, 4th year) |
View |
| 118 |
Shearing strength of bolts (Design of Steel Structures, B.Tech, 4th year) |
View |
| 119 |
Numerical on strength of joint (Design of Steel Structures, B.Tech, 4th year) |
View |
| 120 |
Efficiency of joints and numerical (Design of Steel Structures, B.Tech, 4th year) |
View |
| 121 |
Temporary adjustment and measurements in Compass Survey (Surveying, B.Tech, 2nd year) |
View |
| 122 |
Shrunk scale (Surveying, B.Tech, 2nd year) |
View |
| 123 |
Numerical on compass survey (Surveying, B.Tech, 2nd year) |
View |
| 124 |
Included angle method (Surveying, B.Tech, 2nd year) |
View |
| 125 |
Included angle and local attraction (Surveying, B.Tech, 2nd year) |
View |
| 126 |
Direct Method of Corrected Bearing (Surveying, B.Tech, 2nd year) |
View |
| 127 |
Compass Survey (Surveying, B.Tech, 2nd year) |
View |
| 128 |
Second theorem of Castigliano numericals 2(Structural Analysis 2, B.Tech 3 year) |
View |
| 129 |
second theorem of Castigliano numericals 1(Structural Analysis 2, B.Tech 3 year) |
View |
| 130 |
Second theorem of Castigliano numericals 3 (Structural Analysis 2, B.Tech 3year) |
View |
| 131 |
Second theorem of Castigliano numericals 5(Structural Analysis 2, B.Tech 3 year) |
View |
| 132 |
Second theorem of Castigliano numericals 4(Structural Analysis 2, B.Tech 3 year) |
View |
| 133 |
Hydrostatic pressure force on vertical plane surface (Fluid Mechanics, B.Tech 2 year) |
View |
| 134 |
Presure force in horizontal and inclined suface (Fluid Mechanics, B.Tech, 2 year) |
View |
| 135 |
Hydrostatic pressure Numericals 2(Fluid Mechanics, B.Tech 2 year) |
View |
| 136 |
Numerical on hydrostatic pressure 1(Fluid Mechanics, B.Tech, 2 year) |
View |
| 137 |
Vertical Type Sedimentation Tank_compressed (Environmental engineering, B.Tech 3rd year) |
View |
| 138 |
Valves used in pipe system (Environmental engineering, B.Tech 3rd year) |
View |
| 139 |
Types of Disinfection (Environmental engineering, B.Tech 3rd year) |
View |
| 140 |
Turbidity (Environmental engineering, B.Tech 3rd year) |
View |
| 141 |
Trickling Filter_(Environmental engineering, B.Tech 3rd year) |
View |
| 142 |
Trickling Filter parameters_(Environmental engineering, B.Tech 3rd year) |
View |
| 143 |
Treatment and Disposal of Sludge-(Environmental engineering, B.Tech 3rd year) |
View |
| 144 |
Surface Overflow Rate_(Environmental engineering, B.Tech 3rd year) |
View |
| 145 |
Standard Rate Trickling Filter_(Environmental engineering, B.Tech 3rd year) |
View |
| 146 |
Sludge Volume Index_(Environmental engineering, B.Tech 3rd year) |
View |
| 147 |
Slow Sand Filtration (Environmental engineering, B.Tech 3rd year) |
View |
| 148 |
Sedimentation Tank_compressed (Environmental engineering, B.Tech 3rd year) |
View |
| 149 |
Seasonal Variations of Water Supply (Environmental engineering, B.Tech 3rd year) |
View |
| 150 |
Recirculation in Trickling Filter_(Environmental engineering, B.Tech 3rd year) |
View |
| 151 |
Rapid Sand Filtration (1)(Environmental engineering, B.Tech 3rd year) |
View |
| 152 |
Qualities of Raw Water (Environmental engineering, B.Tech 3rd year) |
View |
| 153 |
Problems in Filtration (Environmental engineering, B.Tech 3rd year) |
View |
| 154 |
Population Forecasting (Environmental engineering, B.Tech 3rd year) |
View |
| 155 |
oxidation pond_(Environmental engineering, B.Tech 3rd year) |
View |
| 156 |
Numericals on Trickling Filter (Environmental engineering, B.Tech 3rd year) |
View |
| 157 |
Numericals on Activated Sludge Process (Environmental engineering, B.Tech 3rd year) |
View |
| 158 |
Methods of Activated Sludge Process (Environmental engineering, B.Tech 3rd year) |
View |
| 159 |
Method of treatment of sludge_(Environmental engineering, B.Tech 3rd year) |
View |
| 160 |
Measurement of Colour, Taste and Odour (Environmental engineering, B.Tech 3rd year) |
View |
| 161 |
Measurement of Alkalinity (Environmental engineering, B.Tech 3rd year) |
View |
| 162 |
Mass Curve Method (Environmental engineering, B.Tech 3rd year) |
View |
| 163 |
Introduction to Wastewater Engineering (Environmental engineering, B.Tech 3rd year) |
View |
| 164 |
Incremental Increase Method (Environmental engineering, B.Tech 3rd year) |
View |
| 165 |
High Rate Trickling Filter_(Environmental engineering, B.Tech 3rd year) |
View |
| 166 |
Hardness in water (Environmental engineering, B.Tech 3rd year) |
View |
| 167 |
Fire Demand (Environmental engineering, B.Tech 3rd year) |
View |
| 168 |
Filtration (Environmental engineering, B.Tech 3rd year) |
View |
| 169 |
Drinking Water Supply (Environmental engineering, B.Tech 3rd year) |
View |
| 170 |
Disinfection (Environmental engineering, B.Tech 3rd year) |
View |
| 171 |
Determination of BOD(Environmental engineering, B.Tech 3rd year) |
View |
| 172 |
Design of Trickling Filter (1)_(Environmental engineering, B.Tech 3rd year) |
View |
| 173 |
Design of Sewer (Environmental engineering, B.Tech 3rd year) |
View |
| 174 |
Design of Sedimentation Tank_(Environmental engineering, B.Tech 3rd year) |
View |
| 175 |
Complete Mix Process for Activated Sludge (Environmental engineering, B.Tech 3rd year) |
View |
| 176 |
COD and BOD (Environmental engineering, B.Tech 3rd year) |
View |
| 177 |
Coagulation(Environmental engineering, B.Tech 3rd year) |
View |
| 178 |
Chlorine as a Disinfectant (Environmental engineering, B.Tech 3rd year) |
View |
| 179 |
Chemical Water Quality Parameters(Environmental engineering, B.Tech 3rd year) |
View |
| 180 |
Breakpoint Chlorination (Environmental engineering, B.Tech 3rd year) |
View |
| 181 |
Bacterial Growth Curve(Environmental engineering, B.Tech 3rd year) |
View |
| 182 |
Arithmetic Increase Method (Environmental engineering, B.Tech 3rd year) |
View |
| 183 |
Alum Coagulation(Environmental engineering, B.Tech 3rd year) |
View |
| 184 |
Alkalinity (Environmental engineering, B.Tech 3rd year) |
View |
| 185 |
Activated Sludge Process (Environmental engineering, B.Tech 3rd year) |
View |
| 186 |
Types of Cement (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 187 |
Raingauge Network (Engineering Hydrology, B.Tech, 4th year) |
View |
| 188 |
Rainfall Measurement (Engineering Hydrology, B.Tech, 4th year) |
View |
| 189 |
Preparation of Data 2 (Engineering Hydrology, B.Tech, 4th year) |
View |
| 190 |
Preparation of Data 1 (Engineering Hydrology, B.Tech, 4th year) |
View |
| 191 |
Precipitation (Engineering Hydrology, B.Tech, 4th year) |
View |
| 192 |
Mean Precipitation-Numericals (Engineering Hydrology, B.Tech, 4th year) |
View |
| 193 |
Mean Precipitation (Engineering Hydrology, B.Tech, 4th year) |
View |
| 194 |
Manufacture of cement (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 195 |
Introduction 2 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 196 |
Introduction 2 (Engineering Hydrology, B.Tech, 4th year) |
View |
| 197 |
Introduction 1 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 198 |
Introduction 1 (Engineering Hydrology, B.Tech, 4th year) |
View |
| 199 |
Hydration of cement (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 200 |
Gypsum 2 (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 201 |
Gypsum 1 (Building Materials & Construction, B.Tech, 2nd year) |
View |
| 202 |
Geometric Design 11 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 203 |
Geometric Design 10 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 204 |
Geometric Design 9 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 205 |
Geometric Design 8 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 206 |
Geometric Design 7 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 207 |
Geometric Design 6 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 208 |
Geometric Design 5 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 209 |
Geometric Design 4 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 210 |
Geometric Design 3 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 211 |
Geometric Design 2 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 212 |
Geometric Design 1 (Transportation Engineering, B.Tech, 3rd year) |
View |
| 213 |
Strain Energy stored due to axial loading (Structural Analysis 2, B.Tech 3 year) |
View |
| 214 |
Strain Energy method 4 (Structural Analysis 2, B.Tech 2 year)_compressed |
View |
| 215 |
Strain Energy method 3 (Structural Analysis 2, B.Tech 2 year)_compressed |
View |
| 216 |
Strain Energy method 2 (Structural Analysis 2, B.Tech 3 year) |
View |
| 217 |
Moment Distribution Method rules 4 (Structural Analysis 2, B.Tech 3 year) |
View |
| 218 |
Moment Distribution Method rules 3 (Structural Analysis 2, B.Tech 3 year) |
View |
| 219 |
Moment Distribution Method rules 2 (Structural Analysis 2, B.Tech 3 year) |
View |
| 220 |
Moment Distribution Method rules 1 (Structural Analysis 2, B.Tech 3 year) |
View |
| 221 |
Fixed beam with traingular loading, sinking of support case (Structural Analysis 2, B.Tech, 3 year) |
View |
| 222 |
Fixed beam with point load (Structural Analysis 2, B.Tech 3 year) |
View |
| 223 |
Fixed beam with couple, UDL, Traingular loading (Structural Analysis 2, B.Tech 3 year) |
View |
| 224 |
Fixed Beam analysis (Structural Analysis 2, B.Tech 3 year)_compressed |
View |
| 225 |
Measurement of pressure 4 ( Fluid Mechanics, B.Tech 3 year) |
View |
| 226 |
Measurement of pressure 3 ( Fluid Mechanics, B.Tech 3 year) |
View |
| 227 |
Measurement of pressure 2 ( Fluid Mechanics, B.Tech 3 year) |
View |
| 228 |
Measurement of pressure 1 ( Fluid Mechanics, B.Tech 3 year) |
View |
| 229 |
Moment Distribution Method Hinged (Structural Analysis 2, B.Tech 3 year) |
View |
| 230 |
Types of Pressure and Numerical (Fluid Mechanics, B.Tech 2 year) |
View |
| 231 |
Pascal's Law (Fluid Mechanics, B.Tech 2 year) |
View |
| 232 |
Numericals on pressure 1 (Fluid Mechanics, B.Tech 2 year) |
View |
| 233 |
Numerical on water pressure (Fluid Mechanics, B.Tech 2 year) |
View |
| 234 |
Moment Distribution Method I not constant 2 (Structural Analysis 2, B.Tech 3 year) |
View |
| 235 |
Moment Distribution Method I not constant 1 (Structural Analysis 2, B.Tech 3 year) |
View |
| 236 |
Moment Distribution Method Fixed (Structural Analysis 2, B.Tech 3 year) |
View |
| 237 |
Moment Distribution Method Deflection (Structural Analysis 2, B.Tech 3 year) |
View |
| 238 |
Hydrostatic Law (Fluid Mechanics, B.Tech 2 year) |
View |
| 239 |
Principles of Surveying ( Surveying, B.Tech, 2nd Year) |
View |
| 240 |
Limiting length of offset ( Surveying, B.Tech, 2nd Year) |
View |
| 241 |
Numericals- Chain Survey (Surveying, B.Tech, 2nd year) |
View |
| 242 |
Direct & Indirect Ranging (Surveying, B.Tech, 2nd year) |
View |
| 243 |
Error accuracy precision (Surveying, B.Tech, 2nd year) |
View |
| 244 |
Corrections in Chain Survey (Surveying, B.Tech, 2nd year) |
View |
| 245 |
Chain Survey (Surveying, B.Tech, 2nd year) |
View |
| 246 |
Classification of survey (Surveying, B.Tech, 2nd year) |
View |
| 247 |
Survey Introduction (Suveying, B.Tech, 2nd year) |
View |
| 248 |
Particle size distribution (Geotechnical Engg, B.Tech, 3rd year) |
View |
| 249 |
Hydrometer method (Geotechnical Engg, B.Tech, 3rd year) |
View |
| 250 |
Particle size distribution (Geotechnical Engg, B.Tech, 3rd year) |
View |
| 251 |
Determination of Unit Weight (Geotechnical Engg, B.Tech, 3rd year) |
View |
| 252 |
Determination of specific gravity (Geotechnical Engg, B.Tech, 3rd year) |
View |
| 253 |
Determination of Water Content(Geotechnical Engg, B.Tech, 3rd year) |
View |
| 254 |
Numericals on soil properties (Geotechnical Engg, B.Tech, 3rd year) |
View |
| 255 |
Important Derivations (Geotechnical Engg, B.Tech, 3rd year) |
View |
| 256 |
Properties of soil Contd. (Geotechnical Engg, B.Tech, 3rd year) |
View |
| 257 |
Soil properties (Geotechnical Engg, B.Tech, 3rd year) |
View |
| 258 |
Soil and its type (Geotechnical Engg, B.Tech, 3rd year) |
View |
| 259 |
Bolted Connections (Design of Steel Structures, B.Tech, 4th year) |
View |
| 260 |
Partial Safety Factor (Design of Steel Structures, B.Tech, 4th year) |
View |
| 261 |
Limit State of Strength and Serviceability (Design of Steel Structures, B.Tech, 4th year) |
View |
| 262 |
Design Philosophy (Design of Steel Structures, B.Tech, 4th year) |
View |
| 263 |
Rolled steel section (Design of Steel Structures, B.Tech, 4th year) |
View |
| 264 |
Stress strain curve (Design of Steel Structures, B.Tech, 4th year) |
View |
| 265 |
Introduction to Steel Structures (Design of Steel Structures, B.Tech, 4th year) |
View |
| 266 |
SSB by SDM (Structural Analysis, B.Tech 3 year) |
View |
| 267 |
Slope Deflection Method rules (Structural Analysis, B.Tech 3 year) |
View |
| 268 |
Overhang by SDM (Structural Analysis, B.Tech 3 year) |
View |
| 269 |
Frame case by SDM (Structural Analysis, B.Tech 3 year) |
View |
| 270 |
Fixed end by SDM 2 (Structural Analysis, B.Tech 3 year) |
View |
| 271 |
Fixed end by SDM 1 (Structural Analysis, B.Tech 3 year) |
View |
| 272 |
Deflection case by SDM (Structural Analysis, B.Tech 3 year) |
View |
| 273 |
Types of concrete 4 ( Design of concrete structures 1, B.Tech 3 year) |
View |
| 274 |
Types of cement 3 (Design of Concrete structure 1, B.Tech 3 year) |
View |
| 275 |
Types of cement 2 (Design of Concrete structure 1, B.Tech 3 year) |
View |
| 276 |
Types of cement 1 (Design of concrete structure 1, B.Tech 3 year) |
View |
| 277 |
Steel (Design of Concrete Structure 1, B.Tech 3 year) |
View |
| 278 |
Concrete requirement (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 279 |
Cement (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 280 |
Aggregate and water (Design of Concrete Structures 1, B.Tech 3 year) |
View |
| 281 |
Viscosity (Fluid Mechanics, B.Tech 2 year) |
View |
| 282 |
Variation of viscosity, compressibility and bulk modulus (Fluid Mechanics, B.Tech 2 year) |
View |
| 283 |
Vapour pressure and Cavitation (Fluid Mechanics, B.Tech 2 year) |
View |
| 284 |
Surface tension numericals, wetting and non-wetting Liquids (Fluid Mechanics, B.Tech 2 year) |
View |
| 285 |
Surface tension (Fluid Mechanics, B.Tech 2 year) |
View |
| 286 |
Rheology of fluids 2 (Fluid Mechanics, B.Tech 2 year) |
View |
| 287 |
Rheology of Fluids 1 (Fluid Mechanics, B.Tech 2 year) |
View |
| 288 |
Properties of fluids (Fluid Mechanics, B.Tech 2 year) |
View |
| 289 |
Introduction of Fluid and Fluid Mechanics (Fluid Mechanics, B.Tech 2 year) |
View |
| 290 |
Capillarity (Fluid Mechanics, B.Tech 2 year) |
View |
